Product Information - Laminate

  • Laminate is constructed in various thickness grades, depending on the purpose they serve.  Horizontal grade is one of the thickest laminates at .039” and is designed for flat, high-impact and heavy use countertops.
  • Vertical grade is the thinnest grade at .028” and is often used for low impact vertical installations such as backsplashes.
  • There are two options of backsplashes.  If the material has been molded in to a post-form backsplash, there will be no seam and the backsplash will be “rounded”.  The second option is a backsplash that is built at the home site and will be set on the back of the countertop.  This backsplash will have a “square” edge and a seam will be created.
  • Sinks are typically top mounted or deck mounted.  The sinks can be a variety of finishes, such as stainless steel, cast iron and acrylic. 
  • Under mounted sinks are not recommended as it’s difficult to protect against water penetration.  Once water penetrates the particle board base of this product, it will swell and deteriorate.
  • There are virtually hundreds of colors to choose from when selecting laminate.  Almost any décor can be matched which is one of the reasons laminate countertops are so popular.
  • In addition, special finishes are available.  Typically, the cost is slightly higher on the specialty finishes.  The finishes include the looks of stone, wood, granite, marble and even leather. 
  • Laminate offers a variety of edge treatments.  There are two basic edges.  A straight edge is simply a strip of laminate applied to the front edge of the countertop.  There will be a thin seam visible in this application.
  • Since laminate is pliable when heated, it can be wrapped around plywood to create a rounded edge.  This edge is called a post-formed edge. 
  • There are two decorative edge treatments that are commonly used.  The standard beveled edge in which solid surface or wood can contrast with the laminate.   You can also use a contrasting laminate, such as a stone look, to apply to this beveled edge. 
  • A full front edge molding allows for a limitless range of options to choose.  The most commonly seen profile is called an ogee edge.  This is a double curved form made up of a concave and convex half that looks like the letter S.  It will appear seamless at inside corners and can be bent around a radius at the outside corners.  You can stain a wood ogee to match your cabinets, or insert a solid surface edge band.
  • You can add a metal or texture in the backsplash for a unique and different.  There are metals and textures made for this purpose and are typically available where the material will be selected.
BBB Financing       |       Floor Care       |       Reviews
FloorEver Interiors
2705 S. Alma School Road, Suite 4 | Chandler, AZ 85249 | 480-899-2640
Store Hours: Mon. - Thurs. 9am-6pm | Fri - Sat. 10am-5pm | Closed Sunday
McMurdy Floors & Interiors, LLC. - AZROC 267464 & 267645